We may have an option for fenders for your 2019 Solaire 268 BHSK, though there are no custom-fit replacements available for your trailer. Based on my research it looks like this is a tandem axle trailer with 15 inch wheels, and we do have fenders for that size trailer. What you will want to do is measure your current fenders and get replacements that match up to the size as much as possible, and use your existing hardware to bolt them on. They can also be painted to match whatever color... view full answer...
We do have some replacement parts, it looks like you have the Hanger Bracket - # 92925 (piece 22) but may be missing some of the hardware needed to mount it.
Hanger Bracket Wing Nut - # 92927 (piece 25)
Leg Bracket Wing Bolt - # 92929 (piece 27)
I have also attached an image for you to reference. view full answer...
Yes, there is an option for a black rim like the one you were looking at. It is the Dexstar Steel Mini Mod Trailer Wheel item # AM20545. It is a 15" x 6" rim with a 5 on 4-1/2 lug pattern. This wheel is identical to the Karrier ST225/75R15 Radial Tire item # AM32545 except for the color. The tire in that combo is the Karrier ST225/75R15 Radial Tire item # AM10256. This is a radial tire with a maximum load capacity of 2,540 lbs at 65 psi. It has a speed rating of M which tops out at 81 mph. view full answer...
Hey Allen, I really like the solid stainless steel lug nuts part # KALN1375S. These are never going to bulge or corrode like the other two piece lug nut options will so you'll never have any issues you'd have to blame on your lug nuts.
Your wheels have steel inserts where the lug nuts contact them so you wouldn't have to worry about issues from dissimilar metals. view full answer...
Yes, you can use the # TLL160RK on your 2019 Palomino Solaire 268BHSK without having to modify the rear of the trailer. These are surface mount lights so they can sit where the old lights were located. If you want an exact replacement it looks like it originally came with the # RVSTLB61 and # RVSTLB60. view full answer...
The Lippert Underchassis Double Bin Storage Unit part # LC125460 does not come with hardware, this would need to be supplied by the end user. That said, it's just nuts and bolts (see photo below) so you can obtain these locally at a hardware store.
In regards to installation, the center mounting bracket is not required which you can see in the install instructions which I have attached below. view full answer...
The Lippert High-Speed Power Stabilizer Jack # LC298707 would be completely separate from the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 so they would be able to both be used together. The # LC672136 has leveling capabilities while the # LC298707 can only be used as a stabilizer so you'll want to first level your trailer with the # LC672136 and then lower the legs of the # LC298707 to help stabilize the trailer. view full answer...
There wouldn't be anything else that you could check on the Lippert Electric Trailer Jack with Footplate # LC285318 since the only issue you'd probably have would be internally with either the threaded rod or gears. Most likely you'll be fine, but I don't recommend using an impact on it again. You can replace the override nut with part # LC55FR. view full answer...
You could upgrade to the Replacement Air Distribution Box for Furrion Chill RV Air Conditioners # FR57PR. This air distribution box will upgrade your current box and will work with all Furrion Chill air conditioners. view full answer...
Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover:
- Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black # LC643923
This will install by screwing it in from the screws in the rear cover. view full answer...
Hey Allen, the correct replacement for your for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side. view full answer...